TP-Link
TP-Link Archer MR600 AC1200 4G+ Cat6 Gigabit Router
The TP-Link Archer MR600 is a 4G+ router that combines mobile broadband and WiFi in one device, designed for users who need flexible internet access without a fixed line connection. Plug in a SIM card to get speeds up to 300 Mbps and share WiFi across your home or office.
Why this product
4G+ Cat6 with 300 Mbps download
Uses carrier aggregation to combine cellular signals for faster speeds. Upload speeds reach 50 Mbps.
AC1200 dual-band WiFi
300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz with beamforming and amplifiers for stronger coverage throughout your space.
Four Gigabit Ethernet ports
One WAN/LAN port supports cable, fiber, or DSL modems. Three LAN ports handle wired devices like game consoles and smart TVs.
Works as a backup router
Plug in an Ethernet cable from your modem to use it as a standard WiFi router, with 4G as your failover connection.
MU-MIMO for multiple devices
Lets many devices connect simultaneously without slowing each other down, reducing latency and increasing overall throughput.
TP-Link OneMesh compatible
Extends seamlessly with other OneMesh products to create a single mesh network under one WiFi name.
- 4G+ StandardCat6: 300 Mbps download, 50 Mbps upload
- WiFi SpeedAC1200 (300 Mbps @ 2.4 GHz + 867 Mbps @ 5 GHz)
- Ethernet Ports4 × Gigabit (1 WAN/LAN + 3 LAN)
- Dimensions202 × 141 × 33.6 mm
- Power12VDC 1.5A
- Operating Temp0°C to 40°C
- SKUTPL-1300
- EAN1210002618311
- Accepts Nano SIM cards from 100+ countries; compatible with FDD-LTE bands B1, B3, B5, B7, B8, B20, B28 and TDD-LTE bands B38, B40, B41.
- Works with cable, fiber, or DSL modems via the WAN/LAN port in router mode.
- Supports IPv4 and IPv6 protocols, PPTP/L2TP/IPSec/OpenVPN, and dynamic DNS services.
- Gigabit Ethernet ports require Cat5e or Cat6 cable; actual wired speeds depend on your connected device and network conditions.
- Does not support Power over Ethernet (PoE).
Best for
- Remote locations or areas without fixed broadband
- Users who need a backup internet connection for failover
- Households with multiple connected devices that demand consistent speeds
- Gaming and HD streaming over mobile networks
- Small businesses needing flexible, portable connectivity
Trade-offs
- Fixed-line users in urban areas – a standard fiber or cable router will deliver higher speeds and lower latency than 4G.
- Very high-bandwidth use – Cat6 mobile broadband tops out at 300 Mbps download, whereas fiber often exceeds 500 Mbps.
- Areas with poor cell coverage – performance depends entirely on signal strength where you are located.
- PoE-powered devices – the Ethernet ports do not support Power over Ethernet.
Searching for a stable and flexible network connection? Archer MR600 provides both as a 4G+ LTE WiFi router. Compared with traditional WiFi routers, it integrates 4G+ and WiFi technology, meaning MR600 acts like a phone and needs only a Nano SIM card to get internet access. Experience stable WiFi and share it with your family and friends wherever you are.
Whether you're bingeing HD movies, downloading entire libraries of data, or gaming online, MR600's boosted 300 Mbps download speeds fulfills your devices' needs. Such fast broadband and reliable internet access is thanks to its 4G+ Carrier Aggregation technology which combines different carrier signals for even faster bandwidth.
Connect to the internet in every room with an expansive and strong AC1200 dual band Wi-Fi. MR600's Beamforming concentrates signals towards your connected devices. Its Power Amplifier and Low Noise Amplifier also amplify sending and receiving capabilities, both of which boost your signal coverage.
Full Gigabit Ethernet ports provide reliable, warp-speed connections for high-intensive wired devices such as your smart TV, game console, NAS, and more. MR600 also provides a WAN port compatible with cable, fiber, and DSL modems. When it's set as a wireless router, its 3G/4G connection works as a backup to provide a solid internet connection for you.
MU-MIMO technology enables multiple devices to connect to the internet at the same time, reducing wait time, increasing WiFi throughput for every device, and boosting the efficiency of each data stream. With MU-MIMO supported, the Archer MR600 provides users a faster network, less interference, and lower latency.
Enjoy a stable, whole-home WiFi connection even while you're moving around your home. The MR600 works with TP-Link OneMesh products to create a seamless network under a single WiFi name.
Set up Archer MR600 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
Networking
| Brand | TP-Link |
|---|---|
| 4G+ Standard | Cat6: Download 300 Mbps, Upload 50 Mbps |
| FDD-LTE Bands | B1, B3, B5, B7, B8, B20, B28 |
| TDD-LTE Bands | B38, B40, B41 |
| 3G Support | DC-HSPA+/HSPA/UMTS (B1, B5, B8) |
| Carrier Aggregation | B1+B3, B1+B5, B1+B7, B1+B8, B1+B20 |
| SIM Slot | Nano SIM |
| WAN Type | Dynamic IP, Static IP, PPPoE, PPTP, L2TP |
| Protocols | IPv4, IPv6 |
| VPN | PPTP, IPSec, OpenVPN |
Performance
| WiFi Standard | 802.11a/n/ac (5 GHz), 802.11b/g/n (2.4 GHz) |
|---|---|
| WiFi Speed | 300 Mbps (2.4 GHz) + 867 Mbps (5 GHz) = AC1200 |
| Antennas | 2 × Detachable External 4G LTE Antennas |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Guest Networks | 2 (1 × 2.4 GHz, 1 × 5 GHz) |
Ports & Power
| LAN/WAN Ports | 1 × 10/100/1000 Mbps LAN/WAN + 3 × 10/100/1000 Mbps LAN |
|---|---|
| Power Supply | Input 100–240V~, Output 12VDC 1.5A |
| Buttons | WPS/Reset, WiFi On/Off, Power On/Off |
Physical
| Dimensions | 202 × 141 × 33.6 mm |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Certifications | CE, RoHS |
| Package Contents | Router, power adapter, RJ45 Ethernet cable, quick installation guide |
Shipping
All our products are shipped from the United Kingdom within 24 to 48 hours of purchase. See our Shipping and Returns page for full details.
Returns
- Tech Syndicate offers a full money-back guarantee on all purchases made in our store. If you are not satisfied with your purchase, we will provide a full refund, no questions asked.
- Refunds are available within 45 days of delivery.
- After the 45-day period you are no longer eligible for a refund, so we encourage you to try the product within the first few weeks to make sure it fits your needs.