Ubiquiti POE-24-24W-G 24V Gigabit PoE Injector 24W
Ubiquiti
Ubiquiti POE-24-24W-G 24V Gigabit PoE Injector 24W
The Ubiquiti Networks Ubiquiti POE-24-24W-G is a 24V Gigabit PoE injector designed to power Ubiquiti networking devices while protecting them from electrical surges and ESD damage. It supplies 24W of power over standard Ethernet cabling and includes surge, clamping, and ground protection built in.
Why this product
Gigabit passthrough with PoE injection
Routes network data and power on a single Ethernet cable using all four pairs. Compatible with airFiber, airMAX, UniFi, EdgeMAX, mFi, and airVision devices.
Multi-layer surge and ESD protection
Includes surge protection on both data and power lines, clamping protection, and grounded AC input to prevent ESD-induced failures, the leading cause of PoE device damage.
Electrical isolation and remote management
Features a reset button and remote reset capability for troubleshooting without visiting the installed device. 80%+ efficiency keeps heat and power draw low.
- Output voltage24VDC @ 1.0A
- Power output24W
- Input voltage90–260VAC @ 47–63 Hz
- Gigabit LAN portYes
- Efficiency80+%
- Operating temperature0 to 40°C
- SKUUBI-1221
- EAN810354023538
- Works with Ubiquiti airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and airVision/UniFi Video products that accept 24V PoE input.
- Gigabit Ethernet pass-through: connects a standard Cat5e or Cat6 Ethernet cable on the LAN side and outputs power and data together on the PoE side.
- Input: 90–260VAC mains power. Output: 24VDC @ 1.0A (24W maximum).
- Remote reset requires the device on the PoE side to support this feature; not all Ubiquiti products include it.
- Not for devices that require a different PoE voltage (such as 48V or 12V models).
Best for
- Installers powering Ubiquiti wireless access points or cameras over long cable runs without separate power outlets.
- Outdoor and high-noise environments where ESD and surge protection are essential to uptime.
- Network deployments using the full Ubiquiti ecosystem, where compatibility is guaranteed across product lines.
Trade-offs
- High-power devices: The 24W output (1A) is insufficient for devices drawing more than 24W. Verify your endpoint's power budget before purchase.
- Non-Ubiquiti PoE equipment: Not tested or guaranteed compatible with third-party networking devices expecting standard 48V PoE or other voltages.
- Hot-swap or field replacement scenarios: No battery backup; power will be lost during injector replacement or mains outage.
The POE-24-24W-G 24V PoE 1A Gigabit Adapter from Ubiquiti Networks has features like surge protection, clamping protection, maximum surge discharge, and peak pulse current to help protect your Ubiquiti PoE devices. It also includes an AC cable with earth ground.
ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks using this grounded PoE adapter.
This PoE adapter is compatible with most Ubiquiti PoE devices, including airFiber, airMAX, airVision, UniFi, and mFi.
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:
- airFiber®
- airMAX®
- EdgeMAX®
- mFi®
- UniFi® AP
- UniFi Video / airVision®
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
Networking
| Brand | Ubiquiti Networks |
|---|---|
| Standard | IEEE 802.3af PoE (4-pair powering) |
| Gigabit LAN port | Yes, RJ45 shielded socket |
| Remote reset capability | Yes |
Ports & power
| PoE output voltage | 24VDC @ 1.0A |
|---|---|
| Power output | 24W |
| AC input voltage | 90–260VAC @ 47–63 Hz |
| AC input current | 0.6A @ 120VAC, 0.4A @ 240VAC |
| AC connector | IEC-320 C6 |
Performance
| Efficiency | 80+% |
|---|---|
| Switching frequency | 65 kHz |
| Output ripple | 1% max |
| Line regulation | ±1% |
| Load regulation | ±3% |
Protection & Physical
| Surge protection | Difference and common mode |
|---|---|
| Max. surge discharge | 1500A (8/20µs) |
| Clamping protection | 11V data, 60V power |
| Peak pulse current | 36A (10/1000µs) |
| Dimensions | 88 x 57 x 33 mm |
| Weight | 158.5 g |
| Operating temperature | 0 to 40°C |
Shipping
All our products are shipped from the United Kingdom within 24 to 48 hours of purchase. See our Shipping and Returns page for full details.
Returns
- Tech Syndicate offers a full money-back guarantee on all purchases made in our store. If you are not satisfied with your purchase, we will provide a full refund, no questions asked.
- Refunds are available within 45 days of delivery.
- After the 45-day period you are no longer eligible for a refund, so we encourage you to try the product within the first few weeks to make sure it fits your needs.