Ubiquiti UniFi U-PoE++ 802.3bt 60W PoE Injector Adapter

The Ubiquiti UniFi U-PoE++ PoE++ Adapter (60W) is a wall-plug injector designed for network installers and IT administrators who need to power UniFi PoE++ devices — such as wireless mesh access points — without relying on a PoE-capable switch. It injects up to 60W of 802.3bt-class power inline between an existing data run and the powered device, letting it offload power delivery from the switch entirely.

• Up to 60W PoE++ output — Delivers 48V DC at 1.25A over all four pairs, providing the full 60W budget required by high-demand UniFi PoE++ devices.
• Built-in surge and overcurrent protection — Clamping protection, a 1500A max surge discharge rating, and peak pulse current handling guard connected equipment against power transients.
• Universal AC input — Accepts 100–240V AC at 50/60 Hz, making it compatible with mains supplies worldwide without an additional adapter.
• Gigabit LAN passthrough — A shielded RJ45 data input passes Gigabit Ethernet through to the PoE++ output port, so no data bandwidth is sacrificed.
• Broad regulatory certifications — Carries CE, FCC, IC, UL, UKCA, KC, CCC and RoHS marks, covering deployment across most major markets.

• ✓ Compatible with UniFi PoE++ devices that require up to 60W over 802.3bt 4-pair powering.
• ✓ Works with any Gigabit Ethernet data source via its shielded RJ45 input socket.
• ✓ Connects to mains via an IEC-320 C6 AC connector with included power cable; universal 100–240V AC input suits most regions.
• Note: Intended for indoor use only; operating temperature is rated 0 to 40°C and humidity up to 95% noncondensing.
• ✗ Not a substitute for a managed PoE switch — it provides no switching, VLAN, or PoE management functions.

Best for:

• Wireless mesh deployments where a PoE++ access point must be placed away from a switch and only a data run and mains outlet are available.
• Offloading switch power budgets — adding this injector frees up wattage on an existing PoE switch for other ports.
• Multi-region installers who need a single injector model that works on both 120V and 230V mains circuits.
• Environments with transient risk, such as installations near industrial equipment, where surge and peak pulse protection is a priority.

Trade-offs:

• Devices requiring more than 60W — the output is capped at 60W and cannot power equipment with a higher draw.
• Outdoor or high-temperature locations — the adapter is rated only up to 40°C ambient and is not weatherproof.
• Non-Gigabit legacy networks where the Gigabit LAN passthrough would be underutilised and a simpler injector suffices.
• Installations requiring PoE management or monitoring — this is a passive injector with no software integration or port management.

An adapter that can power UniFi PoE++ devices with wireless mesh applications, or offload PoE switch power dependencies.

• Delivers up to 60W of PoE++
• Surge, peak pulse, and overcurrent protection
• Contains RJ45 data input, AC cable with earth ground, and PoE++ output

General

Connectors

Performance

Physical & Environmental