DeepCool FL12R 3-Pack 120mm Reverse ARGB PWM Fan - 55 CFM
DeepCool
DeepCool FL12R 3-Pack 120mm Reverse ARGB PWM Fan - 55 CFM
The DeepCool FL12R 3-Pack 120mm Reverse ARGB PWM Fan suits builders who want customizable RGB lighting without compromising airflow or noise levels. The reverse blade design delivers a clean lighting effect from either intake or exhaust orientation, solving the visual trade-off that comes with traditional fan orientation.
Why this product
Reverse blade for uninterrupted RGB
Unlike conventional fans, this one shows the ARGB halo ring cleanly whether mounted for intake or exhaust. No more choosing between airflow direction and lighting aesthetics.
36 ARGB Gen2 LEDs per fan
Each fan integrates 36 addressable LEDs in a halo ring. Daisy-chain connectors let you sync lighting across all three fans with a single cable.
Quiet operation with fluid bearing
Fluid dynamic bearing and rubber isolation pads keep noise at or below 33.9 dB(A) while delivering 55 CFM and 2.59 mmAq static pressure.
8-pin combined connector
PWM speed control and ARGB sync share a single connector, reducing cable clutter and simplifying installation on compatible motherboards.
Reinforced PBT frame and polycarbonate blades
Enhanced composite materials strengthen structure and dynamic balance for durability under sustained cooling loads.
- Quantity3 fans
- Fan Size120 mm
- Speed Range500–2150 RPM
- Airflow55 CFM
- Static Pressure2.59 mmAq
- Noise Level≤33.9 dB(A)
- ARGB LEDs per fan36 ARGB Gen2
- Warranty3 Years
- SKUDEE-872
- EAN6933412785132
- Fits standard 120 mm fan mounts found in most PC cases, radiators and CPU coolers.
- Requires a motherboard with 4-pin PWM header and 5 V ARGB sync header, or separate 12 VDC and 5 VDC power sources.
- 3-year warranty covers manufacturing defects and premature bearing failure.
- Daisy-chain 8-pin connector works with compatible motherboards; standard boards require separate PWM and LED cables instead.
Best for
- RGB-focused builds where aesthetics matter from both angles
- Builders prioritising quiet case fans without sacrificing airflow
- Setups where daisy-chain ARGB wiring reduces cable routing complexity
- Mid-range cooling applications in standard ATX and smaller cases
Trade-offs
- High-static-pressure cooling: 2.59 mmAq static pressure suits radiators and open airflow, not dense radiators or restrictive case layouts requiring >3 mmAq.
- Systems without ARGB support: If your motherboard lacks 5 V ARGB headers or you do not want RGB, the LEDs cannot be disabled and add unnecessary power draw.
- Non-PWM or legacy chassis: These fans require PWM headers and ARGB sync capability; older systems with only DC voltage regulation cannot control speed or lighting.
- Extreme overclocking or sustained heavy load cooling: 55 CFM and lower static pressure suit standard gaming and workload cooling, not high-performance radiator loops.
The FL12R was meticulously engineered by the DeepCool team to provide a unique light effect with reversed fan blade, ensuring high performance, low noise, and outstanding quality. Three FL12R fans are included in this package.
A LUMINOUS HALO
FL12R integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level.
REVERSE FAN BLADE
Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy uninterrupted RGB fan look on both intake and exhaust.
UNCOMPROMISED PERFORMANCE
Equipped with a long-life fluid dynamic bearing. The FL12R PWM fans boast exceptional cooling specs while remaining relatively quiet.
DURABLE MATERIALS
The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades.
STREAMLINED INSTALLATION
The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience.
General
| Brand | DeepCool |
|---|---|
| Model Number | R-FL12R-BKAPN3-G |
| Quantity | 3 Fans |
Fan
| Size | 120 mm |
|---|---|
| Dimensions (per fan) | 120 × 120 × 25 mm |
| Weight (Total) | 543 g |
| Frame Material | Reinforced PBT |
| Blade Material | Polycarbonate |
| Bearing Type | Fluid Dynamic Bearing (FDB) |
Performance
| Speed Range | 500–2150 RPM ±10% |
|---|---|
| Airflow | 55 CFM |
| Static Pressure | 2.59 mmAq |
| Fan Connector | 4-pin PWM |
| Rated Voltage (Fan) | 12 VDC |
| Rated Current (Fan) | 0.15 A |
| Fan Power Consumption | 1.8 W |
Acoustics & power
| Noise Level | ≤33.9 dB(A) |
|---|---|
| ARGB LEDs per fan | 36 ARGB Gen2 LEDs |
| LED Connector | 3-pin (+5V-D-G) |
| Daisy-Chain Connector | 8-pin (combines PWM + ARGB) |
| Rated Voltage (LED) | 5 VDC |
| LED Power Consumption | 2.75 W |
| Warranty | 3 Years |
Shipping
All our products are shipped from the United Kingdom within 24 to 48 hours of purchase. See our Shipping and Returns page for full details.
Returns
- Tech Syndicate offers a full money-back guarantee on all purchases made in our store. If you are not satisfied with your purchase, we will provide a full refund, no questions asked.
- Refunds are available within 45 days of delivery.
- After the 45-day period you are no longer eligible for a refund, so we encourage you to try the product within the first few weeks to make sure it fits your needs.